Owner`s manual

into the scanner. Use this procedure only when you are sur e the
scanner is not working properly.
1. Turn off the scanner, then turn it on again.
2. Press and hold down CLEAR and insert a pointed object such as a
straightened paper clip into the RESTART hole on the back of the
scanner for about 2 seconds. Information on the scanner's display
disappears.
3. When information reappears on the scanner's display, release CLEAR.
A LOOK AT THE KEYBOARD
A quick glance at this section should help you understand each key's
function.
WEATHER - scans through the ten preprogrammed weather channels.
SOUND SQUELCH - sets the scanner to continue to scan if it stops on a
carrier signal with no voice or other sound.
OFF/VOLUME - turns the scanner on or of f and adjusts the volume.
SQUELCH - adjusts the scanner's squelch.
PRIORITY - sets and turns on and off priority for a particular
channel.
DIRECT - starts a direct frequency search.
MODE - changes the band mode (AM, NFM, or WFM).
L/OUT - lets you lock out selected channels.
STEP - changes the frequency step (5, 12.5, or 50 kHz).
L/O RVW - lets you review locked-out channels.
RESET - resets the default band mode and frequency step.
DELAY - programs a 2-second delay for the selected mode.
Number Keys - each key has a single-digit label and a range of
numbers. Use the digits on the keys to ent er the
numbers for a channel or a frequency. Use the range
of numbers above the key (201 -300, for example) to
select the channel -storage bank. See "Understanding
Channel-Storage Banks."
DECIMAL SYMBOL - enters the decimal point when you enter a frequency.
CLEAR - clears an incorrect entry.
LIMIT - sets the channel or frequency range you want to
search.
UP AND DOWN ARROWS - searches up or down from the currently displayed
frequency.