Model：P26 LCD 16:9 DIGITAL LCD-TV-Monitor 26 Hi-Definition LCD Flat Panel TV OPERATING MANUAL
Contents 1 PREFACE 3 2 SAFETY PRECAUTIONS 3 3 FRONT, BACK, CONNECTIONS OF LCD 5 4 TV INSTALLATION GUIDE 4.1 CONNECTION ANTENNAS 6 4.2 AV VIDEO INPUT DRAWING 6 4.3 S-VIDEO INPUT DRAWING 6 4.
Contents 8 TROUBLESHOOTING AND ADVICE 21 9 SPECIFICATIONS 22 2
PREFACE Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model. SAFETY PRECAUTIONS Preparation Put the monitor on a stable surface. Do not use the monitor with others fixations than those provided or suggested by the manufacturer.
Heating sources and humidity Keep the monitor dry and away from humidity. Keep the monitor away from heat sources Cleaning and maintenance Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor. Only clean the monitor with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or other incidents.
Front , Back , Connections of LCD Front View VOL VOL CH CH IR MENU SOURCE ON / OFF LED POWER Back View and Control Connections 13 14 15 16 17 18 L1 L2 L Y1 Pb1 Pr1 R1 R2 R Y2 Pb2 Pr2 19 CVBS PC IN HDMI2 12 11 10 9 8 7 6 5 RF inp ut S VI DEO PC AUDIO IN 4 HDMI1 3 2 1 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 RF input S VIDEOIN HDMI1 HDMI2 PC IN PC AUDIO IN Pr2 Pb2 Y2 R(CVBS/S-VIDEO) R2(YPbPr2) R1 (YPbPr 1 ) L1(YPbPr1) L2(YPbPr2) L(CVBS/S-VIDEO) Y1 Pb1 Pr1 C
TV INSTALLTION DRAWINGS CONNECTION ANTENNAS VHF ANTENNA VHF ANTENNA OUTDOOR ANTENNA AMPLIFIER INDOOR ANTENNA AMPLIFIER 75 OHM ANTENNA PLUG POWER PLUG OF ANTENNA AMPLIFIER To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
PCINPUT CONNECTION PC IN PC AUDIO IN L1 L2 L Y1 Pb1 Pr1 C VB S PC IN R1 R2 R Y2 Pb2 Pr2 S V ID EO PC AUDIO I N HDM I2 7 H DM I1 R F input
Menu Operation 1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter standby mode and indicator show red. 2. Use POWER button can turn ON LCD TV from standby mode. 1. Press POWER button or button on the remote control to enter standby mode. The indicator is red. 2. Using main power switch turns off LCD TV completely.
Menu Operation - Press the MENU button to display the main menu. - Use / Picture Audio Setup Feature Picture Audio / / buttons to select and adjust the available menus.
Menu Operation Ch2-1 Video 1 Composite Rear Video 2 Component-1 Video 3 Component-2 Video 4 VGA Video 5 HDMI -1 Video 6 HDMI -2 Video 7 S-Video In this manual, the OSD ( On Screen Display) may be different from your TV’ s because it is just example to help the TV operation. Picture Audio Setup Picture Mode Contrast 50 Brightness 50 Sharpness 50 Color 50 Tint 50 User 1. Use / to select what you want to adjust in the Picture menu. Aspect Ratio Feature To Move Wide To Select E nter Menu 2.
Menu Operation Picture Audio Setup Feature Audio Mod e Audio Lan guage Bass 30 Treble 30 Balance 0 Voice English Digital Audio Output 1. Use / to select what you want to adjust in the Audio menu. PCM 2. Press To Move To Select Enter Menu and button to adjust. 3. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu. To Exit You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND menu.
Menu Operation Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press Enter key to enter your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically saved as below: Autoprogram Menu NTSC Channel 19 Not Found Analog Channels Found 2 Digital Channels Found 0 Progress(%) When the channels are found, use / 12 to add it to the channel list.
Menu Operation P ictur e Audio Time Set Sle ep Time r Adva nced Video M enu Off Passw ord Se t 1. Use / to select what you want to adjust in the Feature menu. Paren ta l Co n tro l S etup Fe ature Press / D ig ita l Cl osed C aption 2. Press To Move Enter To Select Menu and button to adjust. 3. When you are satisfied with your adjustment, press MENU to exit the main menu. To Exit button and then use Enter the time set menu as below that allows you to set the time the TV will display.
Menu Operation - Noise Reduction--Spatial: press Enter to select on or off. - Noise Reduction--Speckle: press Enter to select on or off. - Noise Reduction--Temporal: press Enter to select on or off. - Auto Contrast Enhancement: press Enter to select on or off. - Color Temperature: press Enter to select one of Normal/Cool and Warm. - 3D Y/C: press Enter to select on or off. - Adaptive Contrast: press Enter to select on or off. - Setting: press Enter to return to the factory setting.
Menu Operation - Style: press Enter to select one of Automatic and Custom, when you select automatic, the others are disable and can not be adjusted. - Size: press Enter to select one of Normal/Large and Small. - Font: press Enter to select one of Default and from Font1 to Font7. - Text Color: press Enter to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White. - Text Opacity: press Enter to select one of the Solid/Flashing/Transparent/Translucent.
Menu Operation -Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters -Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size also will change. -Position This function is to adjust the picture to Left/Right and Up/Down as you prefer.. Press / button and then use configuration.
Menu Operation Time Set Sleep Timer Picture Off Advanced Video Menu Audio Setup Feature Press / To Move Ent er To Select Me nu To Exit button and then use Enter the time set menu as below that allows you to set the time the TV will display. Press ◄/► to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min /60min/90min and OFF. Press Enter to enter the advance video menu.
REMOTE CONTROL Remote control instructions Switch on LCD TV when at standby mode or vice versa. Press to mute the sound. Press again or press VOL+ to unmute. PMODE SMODE VOL Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seconds. CH -/-- SOURCE Press this button to enter a program number for multiple program channel such as 2-1,etc. MENU EXIT CCD MTS SLEEP Return to the previous channel viewed.
Allows you to navigate the on-screen menus and adjust the system settings to your preference. Clears all on-screen displays and returns to TV viewing from any menu. PMODE SMODE Brings up the main menu to the screen. VOL CH SOURCE Press to cycle through the input source in following: Ch Video1 Video3 Video4 Video2 MENU EXIT CCD MTS ZOOM Video7 SLEEP Video6 Video5 Closed caption button. EPG Audio selection button.
Battery Usage Caution a)Open the cover b)AA size batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks on the batteries and within the battery compartment c)Replace the battery cover To prevent battery leakage which may result in bodily injury or damage to the remote: 1.Install all batteries correctly, and as marked on the remote control. 2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc) Remove batteries when the remote is not used for a long time.
TROUBLESHOOTING AND ADVICE Before calling our SAS centre, please check if you can solve the troubleshooting by yourself. Troubleshooting Control No signal Please check that all cables and cord's are correctly plugged in. No color shades Adjust the contrast, the color and the brightness Stain show on the screen. May be result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
SPECIFICATIONS Screen Size 26 Inch Display Type TFT Resolution(Pixel) 1366 * 768 Brightness 500cd/㎡ 16 . 2M Color Contrast Ratio 800 : 1 View Angle(H/V) 160 /150 Aspect Ratio 16:9 110V/220 Voltage Selectable AC INPUT TV System NTSC Video Input Format NTSC Antenna Input Standard Audio Output antenna socket 75Ω L / R 20W*2 Video Video 1. 0vp - p75Ω; RCA S-Video Y:1.0Vp-p±3db C:0.
