Owner`s manual

6-IN-ONE REMOTE POWERED BY KAMELEON
2 Installing Batteries/Installing Batteries
• Do not mix old and new batteries, different
types of batteries (e.g., standard, alkaline, or
rechargeable), or rechargeable batteries of
different capacities.
• If you do not plan to use the remote control for
an extended period, remove the batteries.
They can leak chemicals that can destroy
electronic parts.
ABOUT BATTERY LIFE
As with all battery-operated devices, battery life
will vary depending on use, including frequency
and duration of key presses on the Kameleon
screen. Battery life may be extended by:
• reducing the brightness level of the display
screen (see “Adjusting Brightness” on page 6).
• disabling the vibration switch (see “Setting the
Vibration Switch” on page 7)
The two bottom IR indicator segments will flash
when the betteries in your Kameleon are running
low.
INSTALLING BATTERIES
Your remote requires four AA batteries (not
supplied) for power.
1. Push down on the indent marks on the battery
door (located on the back of the remote) and
lift off the cover.
2. Place the AA batteries in the compartment as
indicated by the polarity symbols (+ and -)
marked inside.
3. Align the cover with the compartment opening
and replace it.
4. If batteries are inserted correctly, the display will
turn on and show all keys after any key is
pressed.
NOTE: The two bottom segments of the IR indicator
flash when the batteries are running low.
NOTE: The batteries will need replacement if one of
the following conditions occurs:
1. Pressing any key turns on all keys and icons.
2. The remote control no longer operates and the
display flashes on and off continuously.
❶
❷❷
❸
RS 6in1 Kam Owners Manual.fm Page 2 Monday, June 7, 2004 12:16 PM