Owner`s manual

OWNER’S MANUAL
Using Learning/Using Learning 17
5. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
USING LEARNING
The Radioshack 6-in-1 Remote includes a Learning
feature so you can add functions that are unique to
your home entertainment devices (e.g.,VCR
Tracking Up or Down).However, there are some
considerations:
LEARNING PRECAUTIONS
• Your original remote controls must be in
working order for learning to work properly.
• Learned keys are mode specific, so each one
can store a unique function for each mode.
• Learned keys can be used in macros (see Using
Macros on page 15).
• Do not use the following keys for learning:
Device Keys, M1~M3, P, FAV Scan, SCROLL,
PRESET, PVR VOD, or Record (•) Key.
• Learning capacity is approximately 16 to 25
keys, depending on the code being learned.
• If both learned and keymoved functions are
assigned to the same key, the last programmed
function will be stored.
• A learned function cannot be used as a source
for Keymover (see Using Keymover on
page 19).
• Certain device codes are not learnable
including multi-frequency types, some high
frequency ones, and other unusual formats.
• For optimum learning, avoid high levels of
ambient light such as natural sunlight or
energy-efficient fluorescent lights.
NOTE: Please have your original remote controls
handy before programming learning. Be sure to press
each teaching key within 5 seconds of the previous
entry. Otherwise, the Radioshack 6-in-1 Remote will
exit the programming mode.
PROGRAMMING A LEARNING KEY
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press IR Learn once.The IR Learn
programming screen will appear:
3. Press a device key once (i.e., AUX, CBL/SAT, CD,
TV, DVD, AUDIO, VCR, or PVR) to assign a mode
for learning.The selected device menu screen,
including HOME, will be displayed.
4. Place the Radioshack 6-in-1 Remote head-to-
head (about 2" apart) from your original
remote control. Also locate the key (on your
original remote control) that will serve as the
teaching function.
5. On the Radioshack 6-in-1 Remote, select and
press a key where the learned function will be
stored.The IR segments will display an
incoming animation, continue for three
revolutions, and then the entire display will
turn off.
After the display is off, press and hold the
teaching key (on your original remote control)
until the display (on the Radioshack 6-in-1
Remote) turns on again.The bottom IR
segmentwill flash twice when the code is
successfully captured.
NOTE: If the bottom IR segment displays one
long flash, a learning error has occurred.Try
repeating this step again until a successful
capture occurs. If the function is still not
2"
RS 6in1 Kam Owners Manual.fm Page 17 Monday, June 7, 2004 12:16 PM