Owner`s manual

6-IN-ONE REMOTE POWERED BY KAMELEON
16 Using Macros/Using Macros
2. Press MACRO once.The Macro programming
screen will appear:
3. Press an open Macro Key (e.g.,M1,M2,M3). The
last-selected device menu screen, including
HOME, will be displayed.
4. Enter a desired macro sequence of up to 15 key
presses. For this example, press TV once, then
enter 0 3 for the TV’s channel number. Next,
press CBL/SAT once, then enter 0 7 1 for the
Cable Box’s channel number.
NOTE: If there are more than 15 key presses in
the sequence, the bottom IR segments will
display a long flash denoting an error. The
display will return to the last-selected device
menu screen. To program the macro, start again
with step 3.
5. To save the macro, press and hold P until the
bottom IR segment flashes twice. The
Program Keys will appear again.
6. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
.
7. Now, if you aim the remote control at the
devices selected in step 4 and press the
programmed Macro Key once, the TV will
turn on and tune to channel 3.Then, the Cable
Box will turn on, and tune to channel 071.
CLEARING A MACRO
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press MACRO once.The Macro programming
screen will appear:
3. Select the Macro Key to be cleared and press it
once.The last-selected device menu screen will
be displayed.
4. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear
again.
RS 6in1 Kam Owners Manual.fm Page 16 Monday, June 7, 2004 12:16 PM