Owner`s manual

6-IN-ONE REMOTE POWERED BY KAMELEON
14 Setting the Sleep Timer/Setting the Sleep Timer
5. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
6. Now, after you select a device that has volume
unlocked, pressing VOL!, VOL#, or MUTE
will control the device’s volume only in its own
mode.
UNLOCKING ALL VOLUME CONTROL (RESTORING
D
EFAULT SETTING)
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press VOL once.The Volum e Lo c k
programming screen will appear:
3. Press VO L ! once.The bottom IR
segmentwill flash four times and the Program
Keys will appear again.
4. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
5. Volume will again be independently controlled
according to its default states for all
programmed devices.
SETTING THE SLEEP TIMER
The Radioshack 6-in-1 Remote includes a sleep
timer that lets you set your devices up to be turned
off after a specified time, even if the device does not
have a sleep function.
ENABLING THE SLEEP TIMER
If the SLEEP key does not operate your device’s
built-in sleep timer or activate on the remote, you
must enable the sleep timer for that mode:
1. Press a mode key (i.e., TV, VCR, CBL/SAT, DVD,
CD, AUD).
2. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
3. Press OTHER once.The Other programming
screen will appear:
4. Using the number keys, enter 9 7 0. The IR
segment will flash twice, confirming Sleep is
enabled.
The sleep timer is now enabled for that device.
Repeat these steps for each device where you want
to use the sleep timer.
RS 6in1 Kam Owners Manual.fm Page 14 Monday, June 7, 2004 12:16 PM