Owner`s manual

OWNER’S MANUAL
Changing Volume Lock/Changing Volume Lock 13
8. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
CHANGING VOLUME LOCK
The Radioshack 6-in-1 Remote is set at the factory
for independent volume control of each selected
device.
However, you may change the Volume Lock setting
to Global Volume Lock so that a device’s volume
will be locked to one mode (e.g., to control TV
volume in all other modes).After that, if desired,
you can perform Individual Volume Unlock on a
selected device to set its volume control for
independent operation.
LOCKING VOLUME CONTROL TO ONE MODE
(G
LOBAL VOLUME LOCK)
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press VOL once.The Volume L oc k
programming screen will appear:
3. Press a device key once (i.e., CBL/SAT, CD, TV,
DVD, AUDIO, VCR) where you want the volume
controls locked to.The bottom IR segmentwill
flash twice and the Program Keys will appear
again.
4. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
5. Now, when you press VOL!, VOL#, or MUTE,
the selected device’s volume will be controlled,
regardless of the mode selected.
UNLOCKING VOLUME CONTROL FOR A
S
INGLE DEVICE (INDIVIDUAL VOLUME
UNLOCK)
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press VOL once.The Volu me Lo ck
programming screen will appear:
3. 3. Press VOL# once.Then press a device key
once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO,
VCR, or PVR) where you want the volume
controls unlocked.The bottom IR segmentwill
flash four times and the Program Keys will
appear again.
4. If desired, repeat steps 2 through 3 (of this
section) for each device that you want volume
to be unlocked.
RS 6in1 Kam Owners Manual.fm Page 13 Monday, June 7, 2004 12:16 PM