Owner`s manual

Features

Notes:

• If you cannot reach the area behind the

mounting surface to attach the nuts to the

machine screws, use the two supplied

inch

(3 mm) self-tapping screws and plain washers.

• You can attach the microphone holder using

the supplied double-sided mounting tape.

Caution:

If you use double-sided tape to attach

the microphone holder, select a location that is

not exposed to high temperatures.

MOUNTING THE RADIO

For the best reception, place the antenna’s magnetic

mount base as high as possible on top of your vehi-

cle, or boat, in a vertical position and away from any

source of electrical noise.

Note:

Choose a non-metallic surface when using

screws to mount the base.

21-1850.RC.fm Page 7 Tuesday, September 19, 2000 3:06 PM