Owner`s manual

Operation

USING THE QUIET FEATURE

The quiet feature eliminates interference from other

radios which are not tuned to the same quiet code as

your radio. When you set a quiet code (1–38) and

turn on this feature, you can only communicate with

users who have a radio set to the same channel and

code as your radio.

1. Hold down

QUIET

until

QUIET

appears and the

quiet code flashes.

2. Hold down

until you see the code num-

ber you want to use (see “Quiet Codes” on

Page 17).

3. Press

QUIET

to store the code.

To turn on the quiet feature, press

QUIET

appears. To turn off the feature, press

QUIET

disappears.

Note:

For the most effective communication, select a

quiet code from 7 to 30. If you select a code outside

that range, you must wait 1 to 2 seconds after holding

down

PTT

before you start talking.

21-1850.RC.fm Page 15 Tuesday, September 19, 2000 3:06 PM