Owner`s manual

OPERATION

SETTING THE CHANNEL

Each station has three channels so you can select which

station or stations you want to communicate with. You

can also use a station to monitor sounds near another

station.

For example, you could set the station you installed in the

kitchen to Channel A, a station you installed in the family

room to Channel B, and a station you installed in a bed-

room to Channel C. Then, using the station installed in the

kitchen, you can communicate with the station in the family

room by setting the channel selector to

or with the sta-

tion in the bedroom by setting the channel selector to

Or, if you set all stations to Channel A, you can communi-

cate with both of the other two stations from any station.

Set the channel selector on each station as follows:

• If you want all the stations to communicate with each

other at the same time, set all stations to the same

channel.

43-490.fm Page 7 Friday, August 13, 1999 9:52 AM