Owner`s manual

12
1. Press
LOCK
on the station in the area you want to
monitor. The TALK indicator lights.
Note:
The TALK indicator stays lit until you press
CALL
or
TALK
. This lets you know that the station is
transmitting to another station.
2. Set the channel selector on both stations to the same
channel.
3. When you finish monitoring, press
TALK
or
CALL
on
the station in the area you are monitoring to release
the lock. The TALK indicator turns off.
Note:
When you press
LOCK
on a station, you can-
not call or talk to that station until you press
TALK
or
CALL
to release the lock.
43-490.fm Page 12 Friday, August 13, 1999 9:52 AM