Owner`s manual

10
Operation
ˆ
Operation
TURNING THE STEREO
ON AND OFF
To turn the stereo on or off, press
PWR
(pow-
er).
SETTING THE CLOCK
1. If the stereo is off, press
PWR
to turn it
on.
2. The display normally shows the clock. If
necessary, press
DSP
(display) until the
clock display appears.
3. Hold down
DSP
until the time display
flashes. (If you do not press a button
within about 3 seconds, the display
stops flashing.)
4. Repeatedly press
TUN/SEK
(tune/seek)
until the stereo displays the correct
hour. (To quickly advance the hour, hold
down
TUN/SEK
.)
5. Then press
TUN/SEK
until the stereo
displays the correct minute. (To quickly
advance the minute, hold down
TUN/
SEK
.)
ADJUSTING THE SOUND/
TUNING
When you listen to your stereo, adjust these
controls to suit your listening preferences
and tune the stereo.
SEL
(select) — Repeatedly press to select
the Volume, Bass, Treble, Balance, or Fader
audio setting.
VOL
(volume) or
VOL
— Press to ad-
just the level of Volume, Bass, Treble, Bal-
ance, or Fader.
Warning:
To protect your hearing, do not lis-
ten at high volume levels. Slowly increase
the volume to a comfortable listening level.
TUN/SEK
or
TUN/SEK
— Hold down for
about two seconds to automatically seek the
next clear station. Repeatedly press for man-
ual up or down tuning.
AMS
(automatic memory scan) — Hold down
to automatically scan and store the next six
strong stations in the selected band, or press
to scan all stations stored in a selected mem-
ory group (see “Memory Tuning” on
Page 11).
BND
(band) — Press to select the desired
band and memory group.
LOC
(local/DX) — Press to improve reception
of a strong station.
M/S
(monaural or stereo) — press to select
stereo or mono reception (FM band only).
LOU
(loudness) — Press to boost the audio
output.
MUT
(mute) — Press to attenuate the sound.
12-2118.fm Page 10 Wednesday, May 24, 2000 12:13 PM