Owner`s manual

17
4. Press
CD
.to pause play.
PAUS
appears. Press
CD
again to
resume play.
5. To remove a CD from the CD player,
press
EJECT
.
EJT
replaces
on the display.
Notes:
• If you eject a CD while it is playing
and do not remove it from the CD
player, the CD player automatically
draws the CD back in and starts
playing again after about 5 seconds.
• If you eject a CD then remove it
from the CD player, the CD player
switches to radio operation.
SELECTING A TRACK
To select a track on the loaded CD,
press
SKIP SEEK
during play to ad-
vance to the next track or
SKIP
SEEK
to go back to the start of the cur-
rent track. Repeatedly press
SKIP
SEEK
or
SKIP SEEK
to select the
next or previous track.
AUDIBLE SEARCH
To search for a particular section within
a track, hold down
SKIP SEEK
or
SKIP SEEK
during play. The CD
player rapidly plays the CD either for-
ward or backward, and the sound low-
ers. When you hear the section you
want, release
SKIP SEEK
or
SKIP
SEEK
to resume normal play.
SCANNING THE TRACKS
You can set the CD player to play the
first 10 seconds of each track on the
loaded CD, so you can find the track you
want to hear.
To begin scanning, press
1SCN
.
SCN
appears during scanning.
To stop scanning and resume normal
play, press
1SCN
again.
SCN
disap-
pears.
REPEAT PLAY
You can set the CD player to repeat a
single track on the loaded CD.
To repeat a track, press
2RPT
during
play. When the track ends, it automati-
cally repeats.
RPT
appears during re-
peat play.
To resume normal play, press
2RPT
again.
RPT
disappears.
REPEAT SELECTION
(RPT A–B)
The Repeat A–B function allows you to
continuously repeat a selection of mu-
sic.
1. Press
3RPT A–B
to set the begin-
ning point (A).
RPT and A appear.
2. Press
3RPT A–B
again to set the
end point (B).
RPT and b appear.
12-2156.fm Page 17 Wednesday, November 24, 1999 10:39 AM