Owner`s manual

16
CD PLAYER OPERATION
Cautions:
• Play only CDs that have this mark
on them:
• The stereo has a wide dynamic
range. As a result, if you turn your
stereo's volume up too high during
soft (low volume) sections of a pro-
gram, your speakers might be dam-
aged when a sudden loud passage
occurs.
• If the CD player is jolted during play,
the rotation speed might suddenly
change or the stereo might make an
unusual noise. This is not a mal-
function.
PLAYING A CD
1. Press
PWR
.
2. Insert a CD, label side up, into the
slot. If the radio is playing, it stops.
The display shows
LOAd, then
and
T-1, and the CD starts to play
from Track 1.
If a CD is already in the CD player,
simply press
CD
.to play the
CD.
The stereo displays the track num-
ber of the track you last played, and
the CD starts to play from that track.
After the CD player plays the entire
CD, it automatically repeats all
tracks, starting with Track 1.
Note:
If you turn off your vehicle's
ignition or the stereo when a CD is
loaded, you must wait about 5 sec-
onds after turning the ignition back
on before you can press
CD
to
play the CD.
3. Repeatedly press
VOL
.or
VOL
to increase or decrease the volume
as desired.
Note:
See “Adjusting the Sound” on
Page 12 for information about
changing the stereo’s other settings.
DIGITAL AUDIO
COMPACT
PWR
SKIP/SEEK
CD
VOL
EJECT
1SCN 2RPT 3RPT A-B 4RDM 5PGM
6MEM/
CLR
12-2156.fm Page 16 Wednesday, November 24, 1999 10:39 AM