Owner`s manual

14
RADIO OPERATION
PLAYING THE RADIO
1. Press
PWR
. The radio automatically
tunes to the last station and band
selected.
2. Press
BND
to select the desired
band.
FMI, FMII
, or
FMIII
appears when an FM band is
selected.
AMI
or
AMII
appears
when an AM band is selected.
3. Tune to the desired station in one of
the following ways:
Manual Tuning: Repeatedly press
SKIP SEEK
or
SKIP SEEK
to tune down or up the selected
band.
Seek Tuning: Hold down
SKIP
SEEK
or
SKIP SEEK
for about 1
second to tune to the next lower or
higher station.
Notes:
• The stereo stops on both strong
and weak stations. To limit seek
tuning to only strong stations,
press
LOC
until LOC appears.
• To improve reception of weak FM
stations, press
STEREO
until MON
appears. The sound is no longer
in stereo, but the reception should
improve. To return to stereo
sound, press
STEREO
again.
appears.
4. Adjust the stereo's controls to your
listening preference (see “Adjusting
the Sound” on Page 12).
MEMORY TUNING
Each memory group (
FMI
,
FMII
,
FMI-
II
, AMI and AMII) holds up to six sta-
tions. You can manually enter stations
into a memory group, or you can let the
stereo search for six stations in a band
and automatically enter these into a
group.
Manually Storing Stations
1. Repeatedly press
BND
to select the
desired band/memory group (
FMI,
FMII, FMIII, AMI or AMII)
DIGITAL AUDIO
COMPACT
PWR
SKIP/SEEK
BND
LOC
STEREO
AMS
12-2156.fm Page 14 Wednesday, November 24, 1999 10:39 AM