Owner`s manual

8
Preparation
advance until you set the correct day
and time.
1. Turn on the system.
2. Hold down
,
,,
,
/TIME SET
for about
two seconds, then release it. The
system announces “Monday” and
'
''
'
appears on the display.
3. Repeatedly press
,
,,
,
/TIME SET
until
you hear or see the correct day.
4. Press
#
##
#
/TIME CHECK
. The system
announces “twelve AM”, and
&&
&&&&
&&
appears on the display.
5. Repeatedly press
,
,,
,
/TIME SET
until
you hear or see the correct hour.
6. Press
#
##
#
/TIME CHECK
. The system
announces “0”, and
&&
&&&&
&&
appears on
the display.
7. Repeatedly press
,
,,
,
/TIME SET
until
you hear or see the correct minute.
8. Press
#
##
#
/TIME CHECK
to confirm
the setting. The system announces
the current day of the week and
the time.
±
±±
±
9. To hear the current day and time,
press
#
##
#
/TIME CHECK
.
±
"016'"
±
"
• If there is a delay of
20 seconds between
any of the steps, the
system exits day/
time setup mode.
Start again from
step 1.
• If you have not set
the day and time and
you press
#
##
#
/TIME
CHECK
, the system
announces “Please
set time”.