User`s guide

36 37
Searching
Your scanner lets you search for frequencies in your
area. When you find a frequency, you can save them
as objects:
• Tune Search – Tune a frequency and begin an
immediate search.
• Limit Search – Search within a defined range.
• Service Search – Optimized for radio services
• Signal Stalker II – Rapidly sweeps a frequency
range for nearby strong signals.
To start a tune search:
1. Press TUNE. The most recent TUNE frequency
appears.
2. Press PAUSE. The scanner begins the search.
To start a limit search:
1. Press the SRCH key repeatedly until the display
indicates Srch Limit.
When a signal is received, the Lmts softkey
changes to FrLO. You can access the Lmts
softkey by pressing FUNC.
2. To change the lower and upper frequency limits,
press the Lmts softkey.
3. Edit the frequencies and press the Save softkey.
S
Srch Limit ZD
AM 26.500000
25.00 1300.00
Lmts Mode Stor
Limit Search
FrLo: 25.000000
FrHi: 1300.000000
Save Exit Dflt
To start a service search:
Press the SRCH key repeatedly until the display
indicates: Railroad, Public Safety, Aircraft, Ham, CB,
Marine, or FRS/GMRS/MURS/DOT.
To start a Signal Stalker II search:
1. Press FUNC and then SCAN.
2. To toggle between All band or Public Safety
bands, press the Bands softkey.
Found Frequencies
• Use the 4-direction keypad to change search
direction.
• Use the number keys to enable/disable sub-bands.
• Press the MODE softkey to change the receive
mode (AM, FM, NFM).
• Press the FrL/O softkey lock out a frequency.
• Press the STOR softkey to create a new CONV
object using the found frequency.
TIP: Found signals can be saved or locked out; both
functions can be useful.
S
Stalker ZlD
FM 154.310000
All: 0.2..5.78.
Band spcl Stor
S
Srch Pubsafty ZD
FM 154.310000
Pub Safety: 01234
FrL/O Stor