User`s guide

26 27
Monitoring
Your scanner can monitoring a single frequency or
object.
To tune a frequency to monitor:
1. Press TUNE.
2. Press the MODE softkey to change the receive
mode (AM, FM, au).
3. Use the number keys to enter a frequency.
4. Press ENT to make this the TUNE frequency. Next
time you press TUNE, this frequency will load.
To monitor an object:
1. Press MAN to enter Manual mode.
2. Use the 4-direction keypad to browse the
objects in the current scan List and select an
object to monitor. Only scan lists that contain
objects appear when browsing.
Finding Stored Objects
The radio searches in the frequency, tag, or ID fields.
When the scanner finds a matching object, you may
press MAN to begin monitoring the object.
To find objects that are locked out:
1. Press PROG.
2. Press the EDIT softkey.
3. Press the FIND softkey.
4. Press the L/Out softkey.
5. Press the NEXT softkey to find the next locked
out object.
Scan
Lists
Objects
To find objects by text string:
1. Press PROG.
2. Press the EDIT softkey.
3. Press the FIND softkey.
4. Press the Text softkey and enter the text string.
4a. Press the Qtxt softkey to use QuickText.
Press the to select one of the 10 Qtxt
options. Press SEL to accept Qtxt selection.
5. Use the 4-direction keypad to scroll through
available objects.
6. Press the OK softkey. Press the Exit softkey to
cancel the Find operation.
To find objects by object type:
1. Press PROG.
2. Press the EDIT softkey.
3. Use the 4-direction keypad to scroll to the filter
softkeys: CONV, TGRP, TSYS, SRCH, and STLK.
4. Press the softkey for the object type.
5. Use the 4-directional keypad to scroll through
available objects.