Owner`s manual

Phone Settings
8
PHONE SETTINGS
SETTING THE LANGUAGE, AREA CODE,
T
IME, AND DATE
1. Press TIME SET/SKIP. Select Language and then ENG
ESP
appears.
2. Press
MESSAGE VOLUME  or . ENG or ESP flashes
to indicate which language you selected.
3. Press
REVIEW
²
to confirm the language. AREA PIN
DAY_WK
appears.
4. Press
MESSAGE VOLUME  or  to choose the digits
for
AREA (area code), PIN (remote operation security
code), and
DAY_WK (day of the week). (See “Remote
Operation” on page 20.) Ô
5. Press
REVIEW
±
or
²
to move to another digit and
press
MESSAGE VOLUME  or  to select the digits.
6. Press
REVIEW
²
to confirm your settings and move to
the time and date.
7. Press
MESSAGE VOLUME  or  to select the time
and date, and press
REVIEW
±
or
²
to move the
cursor.
8. Press
REVIEW
²
to confirm your settings and exit.
9. Press STOP to save your settings and exit at any time.
After the day and time are set, press
TIME CHECK/REPEAT
to hear the day and time.
To avoid losing the day and time settings if AC power fails,
we recommend you install a backup battery before you set
the day and time (see “Installing a Backup Battery”).
SETTING THE NUMBER OF RINGS
Ô NOTE Ô
• The preset pin code is 000.
• The time and date are updated
by the first incoming call with
Caller ID information.
• When setting
DAY_WK, select
from the following codes:
• Monday —
1
• Tuesday — 2
• Wednesday — 3
• Thursday — 4
• Friday — 5
• Saturday — 6
• Sunday — 7
• A appears for AM hours and P
appears for PM hours.
HEADSET
RING
Set RING SELECT on the back of the
system to
2, 4,or7 to set the
desired number of rings before
the system answers a call
(2 rings, 4 rings, 7 rings).