Owner`s manual

Preparation

When batteries become low, the remote control ceases

operating in order to protect stored settings. Replacing

the batteries with new ones restores full functionality and

does not require you to reprogram your remote control.

Warning:

Dispose of old batteries promptly and proper-

ly. Do not burn or bury them.

Caution:

If you do not plan to use the remote for a

month or longer, remove the batteries. Batteries can

leak chemicals that can destroy electronic parts.

DEVICE TYPES

You can use the remote control’s device keys to control

the following types of devices:

— TV

VCR

— VCR or PVR (Personal Video Recorder)

CBL/SAT

— Cable converter or SAT/DSS receiver

DVD

— DVD or LD Player

SETTING UP YOUR REMOTE

To control devices other than the default brands (for ex-

ample, an RCA TV, VCR, and DIRECTV receiver, and a

Pioneer DVD player), perform the following steps. If you

use the default brand devices, skip this section.

1. Refer to “Manufacturers’ Codes” on Page 20 and

write down the code(s) for the brand of each device

you want to program on the supplied label.

Note:

Some manufacturers may have several

codes listed. Try each until you find the right one. If

you cannot find the correct code, see “Manual Code

Search” on Page 17.

2. Turn on all your home entertainment devices.

3. On the remote control, press the desired device key

(

VCR

CBL/SAT

, or

DVD