Owner`s manual

18
Operation
1. On the remote control, press the desired device key
once.
2. Hold down
P
until the red light blinks twice.
3. Press
9 9 0
. The red light blinks twice.
4. To view the code for the first digit, press and release
1
. Count the number of blinks (for example, if there
are three blinks, the first digit is 3) and write down
the number.
Note:
The red light will not blink if the code digit is a
“0”.
5. Repeat Step 4 three more times for each succes-
sive digit by pressing and releasing
2
,
3
, and then
4
.