Owner`s manual

15
Operation
SCAN/FAV
. Starting with the current channel, the remote
control tunes to each channel in ascending order every
three seconds. Press any key to stop the scan.
Note:
For on-air broadcast scans, press
TV
, then press
SCAN/FAV
to start the scan.
USING FAVORITE CHANNEL SCAN
To scan favorite channels, you must first program a fa-
vorite channel table into a device (see “Programming Fa-
vorite Channel Scan” on Page 9).
Press the programmed device key (
TV
or
CBL/SAT
), then
press
SCAN/FAV
. The remote tunes to each favorite
channel in ascending order every three seconds. Press
any key to stop the scan.
USING MACROS
Press the desired macro key once for the first channel
you programmed (see “Programming Macros” on
Page 11), twice for the second channel, and so on.
USING THE POWER KEY
To turn on all devices, hold down
POWER
for at least 2
seconds. Each device turns on in the sequence you pro-
grammed (see “Programming the Power Key” on
Page 12).
To turn off all devices, hold down
POWER
for at least 2
seconds. You should see each device turn off in se-
quence.
Note:
If you do not hold down
POWER
for 2 seconds,
only the current device turns off. To turn off all devices,
you must hold down
POWER
.
CHANGING VOLUME LOCK
Your remote’s Volume Lock is preset so the volume and
mute keys only control the TV volume, no matter what
device is selected. If you want the remote to control the
TV’s volume only, skip this section and leave the original
settings intact.