Owner`s manual

11
Preparation
3. Press
9 9 6
. You can now use the remote for Chan-
nel Scan (see “Using Channel Scan” on Page 14).
4. Hold down
P
until the red light blinks twice.
PROGRAMMING MACROS
Your remote has four macro keys (
MUSIC
,
MOVIE
,
SPORT
, and
NEWS
) that you can use to store up to three
channels per macro key for instant tuning of TV or cable/
satellite channels. For example, if your favorite sports
channel on your cable service is 061, you can store it as
an instant tune-in macro.
Follow these steps to program macros.
1. Hold down
P
until the red light blinks twice.
2. Press
9 9 5
to start the program.
3. Press the desired macro key (
MUSIC
,
MOVIE
,
SPORT
, or
NEWS
).
4. Press
CBL/SAT
or
TV
to select the appropriate home
entertainment device.
5. Press the numbers for the desired channel (for
example, for the sports channel in the previous
example press
0 6 1
). Hold down
P
until the red light
blinks twice to save the setting.
Notes:
• If your original remote control requires you to
press Enter or Select to send a command, press
ENTER
after entering the three-digit channel num-
ber. Hold down
P
until the red light blinks twice.
• If your device requires a four-digit channel num-
ber, make sure to enter four digits, then hold
down
P
until the red light blinks twice.
If you want to add two more channels to the macro keys,
repeat Steps 1–5 twice, each time substituting another
channel number in step 5.