Owner`s manual

20
Caution: Do not hold down the mem-
ory location button. This stores the
currently tuned station into that loca-
tion.
Scanning Stored Stations
The stereo’s automatic memory scan
(AMS) scans all stored stations in
both AM or all three FM memory
groups, pausing for 5 seconds at
each strong station.
1. Press
BAND
until the stereo dis-
plays the band (AM or FM) and
memory group you want to scan.
2. To start automatic memory scan,
briefly press
AMS
.
As the stereo scans each mem-
ory location in the band, the
band and memory group, the
frequency, and
CH
are dis-
played, and the memory loca-
tion number flashes.
Caution: Do not hold down
AMS
. This causes the stereo to
automatically search and store
stations into the selected band
and memory group.
3. To stop scanning when the ste-
reo pauses at a station you want
to listen to, briefly press
AMS
or
the station’s memory location
button. The memory location
number stops flashing.
Caution: Do not hold down
AMS
. This causes the stereo to
automatically search and store
stations into the selected band
and memory group.
Note: If you do not press a
memory location button or
AMS
,
the stereo scans both AM or all
three FM memory groups
repeatedly.
pull
BAL
BASS
TREBLE
FADER
METAL
AMS
F/C
BAND
SCAN
SEEK
6
5
3
2
1
PLL SYNTHESIZER
4
pull
BAL
BASS
TREBLE
FADER
ON
VOL
METAL
AMS
F/C
BAND
SC
A
5
3
2
1
4
12-2108.fm Page 20 Wednesday, July 14, 1999 10:07 AM