Owner`s manual

18
• To temporarily display the time,
press
F/C
. The display shows
the time for 5 seconds, then
returns to the frequency display.
You cannot display the time dur-
ing scan tuning.
MEMORY TUNING
You can store up to 12 AM and 18
FM stations in memory. Each memo-
ry group (AM 1, AM 2, FM 1, FM 2,
and FM 3) holds up to six stations.
You can let the stereo search for six
strong stations in a band and auto-
matically store these into a memory
group, or you can manually store sta-
tions into a memory group.
Automatically Storing
Stations
1. If the stereo is off, turn
ON VOL
clockwise until it clicks to turn it
on.
2. Press
BAND
until the stereo dis-
plays the band and memory
group where you want to store a
group of stations. For example,
to store the first group of AM sta-
tions into AM 1, press
BAND
until
AM 1
appears.
3. Press and hold down
AMS
(auto-
matic memory scan) for about 3
seconds. The stereo scans the
selected band twice and stores
the first six stations it finds.
The band and memory group,
frequency,
CH
, and the memory
location number appear on the
display.
During the first scan, the stereo
only searches for strong sta-
tions, and
LOC
appears on the
display. During the second scan,
the stereo also searches for
weaker stations, and
LOC
disap-
pears from the display.
4. Briefly press
AMS
when the ste-
reo has stored all the stations
you want, or when you want to
stop searching for stations.
BAL
FADER
ON
VOL
METAL
AMS
F/C
BAND
3
2
1
4
pull
BAL
BASS
TREBLE
FADER
ON
VOL
METAL
AMS
F/C
BAND
3
2
1
4
12-2108.fm Page 18 Wednesday, July 14, 1999 10:07 AM