Owner`s manual

14
USING THE CONTROL PANEL
The stereo’s anti-theft control panel
must be in place for the stereo to op-
erate. When you remove it, the ste-
reo does not work. This is a simple,
but effective security measure.
Note:
Any stored stations remain in
memory when the control panel is re-
moved.
INSTALLING THE
CONTROL PANEL
1. Insert the right edge of the con-
trol panel into the right edge of
the recess. Make sure the tab in
the recess fills the slot in the
edge of the control panel.
2. Gently push the left edge of the
control panel into the recess
until you hear a click.
REMOVING THE
CONTROL PANEL
1. Slide on the left side of the
stereo down.
2. Grasp the control panel on the
left side and pull it out to remove
it.
3. Store the control panel in the
supplied carry case.
pull
BAL
BASS
TREBLE
FADER
ON
VOL
PLL SYNTHESIZER
AUTO REVERSE
METAL
AMS
F/C
BAND
SCAN
SEEK
6
5
3
1
4
2
pull
BAL
BASS
TREBLE
FADER
ON
VOL
PLL SYNTHESIZER
AUTO REVERSE
METAL
AMS
F/C
BAND
SCAN
SEEK
6
5
3
1
4
2
pull
BAL
BASS
TREBLE
FADER
ON
VOL
METAL
AMS
F/C
BAND
SCAN
SEEK
6
5
3
2
1
PLL SYNTHESIZER
AUTO REVERSE
4
METAL
6
5
3
1
4
2
AMS
F/C
BAND
SCAN
SEEK
12-2108.fm Page 14 Wednesday, July 14, 1999 10:07 AM