Owner`s manual

22
CASSETTE PLAYER OPERATION
PLAYING A CASSETTE
Caution:
We recommend using
C-60 or C-90 cassette tapes. Avoid
using C-120 cassette tapes. They
are very thin and can easily become
tangled in the tape-handling parts.
Follow these steps to play a cassette
tape.
1. Take up any slack by turning the
cassette’s hub with your finger
or a pencil. Avoid touching the
tape.
2. Insert the tape into the cassette
compartment with its open edge
to the right. The tape begins to
play, and the direction indicator
( or ) appears on the
display
3. If you are playing a metal or
CrO
2
(Type II) tape, press
METAL/4
until
MTL
appears on
the display.
4. Adjust the volume, bass, treble,
balance, and fader levels as
desired.
Notes:
• When the tape reaches the
end of one side, the cassette
player automatically changes
the tape’s direction and plays
the other side of the tape.
Play continues until you
press .
• During play, you can switch to
the other side of the cassette
by pressing and at the
same time until the indicator
on the display changes direc-
tion.
5. Press all the way in to stop
the tape and eject it.
AUTO REVERSE
AUTO RE
V
12-2113.fm Page 22 Wednesday, July 14, 1999 12:18 PM