Owner`s manual

21
3. To stop searching for stations
before it automatically stops,
briefly press
AMS
.
Note:
If a station has a weak
signal or interference, the stereo
might not store it automatically. If
this happens, you can manually
store the station.
Selecting a Stored Station
To select a stored station, press
BAND
to select the correct memory
group. Then briefly press the desired
memory location button. (Do not hold
down the memory location button.
This erases the previously stored
station and stores the currently tuned
station into that location.)
Scanning Stored Stations
The stereo’s automatic memory scan
(AMS) feature scans all stored sta-
tions in a memory group you select,
pausing for 5 seconds at each stored
station.
1. Press
BAND
until the stereo dis-
plays the memory group you
want to scan.
2. To start automatic memory scan,
briefly press
AMS
. The radio
begins scanning the stored sta-
tions, and the current memory
location number flashes. (Do not
hold down
AMS
. This causes the
radio to automatically seek and
store six stations into the
selected memory group).
3. To stop scanning when the ste-
reo pauses at a station you want
to listen to, briefly press
AMS.
Otherwise, the stereo continues
to scan the memory group.
Memor
y
Location Buttons
AUTO REVERSE
12-2113.fm Page 21 Wednesday, July 14, 1999 12:18 PM