Owner`s manual

19
RADIO OPERATION
PLAYING THE RADIO
1. Press
POWER
to turn on the ste-
reo.
2. Press
BAND
to select the AM or
FM band.
AM 1
or
AM 2
appears
on the display when an AM
band is selected.
FM 1
,
FM 2
,
or
FM 3
appears on the display
when an FM band is selected.
Notes:
• Each time you press
BAND
,
the radio tunes to the last sta-
tion selected in the band.
• appears on the display
when an FM signal is received
in stereo.
3. Tune to the desired station in
one of the following ways.
Manual Tunin
g
:
Repeatedly
press
TUNE
or
TUNE
to
tune down or up the selected
band.
Seek Tunin
g
:
Hold down
SEEK
or
SEEK
for about 1 sec-
ond to tune to the next lower or
higher station.
Note:
If the stereo does not find
a strong station when seeking, it
searches the band again for
weaker stations.
4. Press or to increase or
decrease the volume as desired.
Notes:
• See “Adjusting the Controls” on
Page 17 for information about
changing the stereo’s other set-
tings.
• To temporarily display the fre-
quency of the station currently
playing, press
F/C
. The display
shows the frequency for about 5
seconds, then returns to the
clock display.
AUTO REVERSE
ST
AUTO REVERSE
AUTO
R
12-2113.fm Page 19 Wednesday, July 14, 1999 12:18 PM