Owner`s manual

11
3. Connect the violet/black wire to
the right speaker’s negative ter-
minal. This terminal might be
marked with a minus (
–
) sign or
it might not be marked at all.
4. Connect the white wire to the left
speaker’s positive terminal.
5. Connect the green/black wire to
the left speaker’s negative termi-
nal.
Connecting the Antenna
Connect the vehicle’s antenna cable
to the stereo’s large black antenna
connector.
Completing the
Connections
Make sure you have securely made
all other connections, then plug the
harness’ connector into the stereo’s
14-pin wiring socket. Then reconnect
the cable to the vehicle battery’s neg-
ative terminal.
TESTING THE
CONNECTIONS
Turn on your vehicle’s ignition and
install your stereo’s control panel
(see “Installing the Control Panel”
on Page 15). The display should
light and the currently set time (or
12:00
) should appear on the dis-
play when you press
POWER
to turn
on the stereo.
If the stereo does not work,
immedi-
atel
y
disconnect the cable from
y
our vehicle batter
y
’s ne
g
ative
(
–
)
terminal.
Then recheck your con-
nections.
After you verify that the display
lights, follow the instructions in
“Mounting the Stereo” on Page 12.
Vehicle’s Antenna Back of Stereo
Antenna
Connector
14-Pin
Wirin
g
Socket
Harness with
14-Pin Connector
Vehicle Ne
g
ative
Batter
y
Cable
Batter
y
12-2113.fm Page 11 Wednesday, July 14, 1999 12:18 PM