Owner`s manual

10
6. Connect the violet wire to the right rear speaker’s positive terminal.
7. Connect the violet/black wire to the right rear speaker’s negative terminal.
8. Connect the green wire to the left rear speaker’s positive terminal.
9. Connect the green/black wire to the left rear speaker’s negative terminal.
Connecting One Pair of Speakers
If you are using only one pair of speakers, follow these steps to connect the har-
ness to the speakers.
1. Use a small screwdriver to move
2 ch/4 ch
on the bottom of the stereo to
2
ch
(two channel).
2. Connect the gray wire to the right speaker’s positive terminal. This terminal
is usually marked with a plus (+) sign or red mark.
Left Right
White
White/Black
Green/Black
Violet/Black
Gray/Black
Gray
Violet
Green
12-2113.fm Page 10 Wednesday, July 14, 1999 12:18 PM