Owner`s manual

19
Selecting a Stored Station
To select a stored station, press
BND
to select the correct memory group.
Then briefly press the desired mem-
ory location button.
Note
: Do not hold down the memory
location button. This stores the cur-
rently tuned station into that location.
Scanning Stored Stations
The stereo’s automatic memory scan
(AMS) feature scans all stored sta-
tions in the currently selected memo-
ry group, pausing for 5 seconds at
each station.
1. Press
BND
until the stereo dis-
plays the memory group you
want to scan.
2. To start automatic memory scan,
briefly press
AMS
.
As the stereo scans each mem-
ory location in the memory
group, the current memory loca-
tion number flashes on the dis-
play.
Caution
: Do not hold down
AMS
. This causes the stereo to
automatically seek and store
stations into the selected mem-
ory group.
3. To stop scanning when the ste-
reo pauses at a station you want
to listen to, briefly press the sta-
tion’s memory location button.
Note
: If you do not press a
memory location button, the ste-
reo scans the memory group
repeatedly.
12-2111.fm Page 19 Wednesday, July 14, 1999 11:50 AM