Owner`s manual

12
9. If necessary, bend the metal
strap to fit your vehicle’s mount-
ing area. Then attach the other
end of the strap to a solid metal
part of the vehicle. This strap
also helps ensure proper electri-
cal grounding of the stereo.
10. Reconnect the cable to the vehi-
cle battery’s negative (–) termi-
nal.
REMOVING THE
STEREO FROM THE
DASH
If you ever want to remove the stereo
from the dash, follow these steps.
1. Disconnect the cable from the
vehicle battery’s negative (
–
)
terminal.
2. Remove the metal strap
attached to the back of the ste-
reo.
3. Remove the control panel (see
“Removing the Control Panel”
on Page 14).
4. Insert both of the supplied keys
into the slots at the lower left
and right sides of the stereo,
then slide the stereo out of the
dash.
5. While pressing down and hold-
ing the triangle holders on the
top of the stereo, remove the
keys from the slots.
6. Disconnect the wire harness and
the antenna.
7. Reconnect the cable to the vehi-
cle battery’s negative (
–
) termi-
nal.
12-2111.fm Page 12 Wednesday, July 14, 1999 11:50 AM