Owner`s manual

10
6. Connect the violet/black wire to
the right rear speaker’s negative
terminal.
7. Connect the green wire to the
left rear speaker’s positive termi-
nal.
8. Connect the green/black wire to
the left rear speaker’s negative
terminal.
Connecting the Antenna
Connect the vehicle’s antenna cable
to the stereo’s large, black antenna
jack.
Testing the Connections
Caution:
Make sure you have se-
curely made all connections before
continuing with the installation.
Plug the harness’s 14-pin connector
into the 14-pin wiring socket, then re-
connect the cable to the vehicle bat-
tery’s negative terminal.
Turn on your vehicle’s ignition and
test the stereo. If the stereo does not
work,
immediately turn off the igni-
tion, then disconnect the har-
ness‘s 14-pin connector from the
stereo’s 14-pin wiring socket and
disconnect your vehicle battery’s
negative (
–
) cable.
Recheck your
connections.
After you verify that everything
works, make sure the connections
are correctly marked or identified.
Then follow the instructions in
“Mounting the Stereo” on Page 11.
12-2111.fm Page 10 Wednesday, July 14, 1999 11:50 AM