Owner`s manual

1
7
Jack Tone Assignment
Touch-Tone Command
:3xy
x =
ANSWERING MACHINE
and
PHONE
jacks (0–7)
y =
FAX
and
FAX/MODEM
jacks (0–7)
Default Settin
g
: 07
This command lets you set where the AFX-500 routes a call
that includes a fax alert or modem tone. The first digit you en-
ter after the command sets which tones will be routed to the
ANSWERING MACHINE
and
PHONE
jacks; the second digit
sets which tones will be routed to the
FAX
and
FAX/MODEM
jacks.
Related Commands:
“Single Tone Detection” on Page 16
“Fax Alert Tone Detection” on Page 16
“V.25 Modem Tone Detection” on Page 16
“Reverse Modem Tone Detection” on Page 16
Distinctive Ring Service Detection
Touch-Tone Command
: 014 = Off
114 = On
Default Settin
g
: Off
This command sets the AFX-500 to work correctly with your
phone company’s distinctive ring service (see “Using a Dis-
tinctive Ring Service” on Page 8).
Note:
Turning on Distinctive Ring Service Detection deacti-
vates the following features:
• Automatic Answering Machine Transfer
• Automatic No Answer Transfer
• Automatic Ring Reduction
Related Commands:
“Automatic Answering Machine Transfer” on Page 13
“Automatic No Answer Transfer” on Page 13
“Automatic Ring Reduction” on Page 13
“Distinctive Ring Service Assignment”
Distinctive Ring Service Assignment
Touch-Tone Command
: 80xx
x = 0–3
Default Settin
g
: 12
To use distinctive ring service to route your incoming calls, yo
u
must first turn on Distinctive Ring Service Detection (see “Dis
-
tinctive Ring Service Detection”). With distinctive ring detec
-
tion turned on, the AFX-500 processes calls as follows:
• Calls to the main number are routed to the
ANSWERIN
G
MACHINE
and
PHONE
jacks.
• Calls to the second number are routed to the
FAX
an
d
FAX/MODEM
jack.
• Calls to the third number are not answered.
The Distinctive Ring Service Assignment command lets yo
u
change the preset jack assignments for each distinctive ring.
This command has two digits (each 0–3). The first digit set
s
the ring pattern that will be routed to the
ANSWERING MA
-
CHINE
and
PHONE
jacks, the second sets the ring pattern fo
r
the
FAX
and
FAX/MODEM
jacks.
• 0 = not assigned
• 1 = main number
• 2 = second number
• 3 = third number
At the default setting, calls to the main number are routed t
o
the
ANSWERING MACHINE
and
PHONE
jacks, calls to the sec
-
ond number are routed to the
FAX
and
FAX/MODEM
jacks, an
d
calls to the third number are not answered.
Related Commands:
“Distinctive Ring Service Detection”
Press Assigns This Tone
0 No tone assi
g
ned
1 Fax alert tone
2 Reverse modem and fax alert tones
3 V.25 modem tone
4 Reverse modem tone
5 V.25 modem and fax alert tones
6 V.25 modem and reverse modems
7 V.25 modem, reverse modem, and fax alert tones