Owner`s manual

16
S
ingle Tone Detection
T
ouch-Tone Command
:010 = Off
110 = On
D
efault Settin
g
: On
W
hen Single Tone Detection is turned on, the AFX-500 detect
s
ingle-frequency tones. When you or the AFX-500 answer a
c
all, the AFX-500 listens for the following tones for the dura-
t
ion set by the Single Tone Detection Timer:
• 1100 Hz fax alert (CNG) tone
• 2225 Hz reverse modem tone (if this feature is turned on)
• 1300 Hz V.25 modem tone (if this feature is turned on)
A
fter the time set by the Single Tone Detection Timer (see be-
l
ow), the AFX-500 responds only to transfer codes.
T
he following AFX-500 features do not operate with Single
T
one Detection turned off:
• Fax CNG Detection
• Modem Calling Tone Detection
• Reverse Modem Detection
R
elated Commands:
“
Single Tone Detection Timer”
“
Fax Alert Tone Detection”
“
V.25 Modem Tone Detection”
“
Reverse Modem Tone Detection”
S
ingle Tone Detection Timer
T
ouch-Tone Command
:53xx
xx = 4 to 30 seconds
D
efault Settin
g
: 10 seconds
T
his command sets the timer for Single Tone Detection.
R
elated Commands:
“
Single Tone Detection”
Fax Alert Tone Detection
Touch-Tone Command
: 011 = Off
111 = On
Default Settin
g
: On
This command sets the AFX-500 to detect an 1100 Hz fax
alert tone. When you or the AFX-500 answers a call, the AFX-
500 listens for a fax alert tone. If it detects the tone, it routes
the call to the
FAX
and
FAX/MODEM
jacks.
Related Commands:
“Single Tone Detection”
V.25 Modem Tone Detection
Touch-Tone Command
: 012 = Off
112 = On
Default Settin
g
: Off
This command sets the AFX-500 to detect a 1300 Hz V.25
modem tone. When you or the AFX-500 answers a call, the
AFX-500 listens for a V.25 modem tone. If it detects the tone,
it routes the call to the
FAX
and
FAX/MODEM
jacks.
Related Commands:
“Single Tone Detection”
Reverse Modem Tone Detection
Touch-Tone Command
: 013 = Off
113 = On
Default Settin
g
: Off
This command sets the AFX-500 to detect a 2225 Hz reverse
modem tone. When you or the AFX-500 answers a call, the
AFX-500 listens for a reverse modem tone. If it detects the
tone, it routes the call to the
FAX
and
FAX/MODEM
jacks.
Related Commands:
“Single Tone Detection”