Operating instructions

Preventing shorting
of
speaker cords
If the speaker cords short (touch each other or the metal casing), you
will
not only lose the
sound from the speakers,
but
the system may also be damaged
as
a result.
Please read the
guidelines below carefully and take care to connect the speaker cords correctly.
When connecting the speakers, make sure that the exposed wire
of
each
speaker cord does not touch anything other than the correct speaker terminal.
No
Good!
Make sure that exposed
speaker wire strands do
not
touch the exposed wire from
any other speaker cord.
OK!
Make sure that exposed
speaker wire does
not
extend
outside the speaker terminal
and
touch
any other wire.
Make sure that exposed
speaker wire does
not
touch
the rear panel, screws, etc.
CD
Remove about
10
mm
(3/8 in.)
of the plastic insulation
and
twist together the exposed
speaker wire.
@ Unscrew
the speaker terminal,
and
fully insert the speaker
cord so that
no
exposed
speaker wire extends outside
the terminal.
®
Tighten the speaker terminal
to secure the speaker cord.
Check that all the speaker cords are properly connected at
both
the
amplifier and the speaker ends.