Owner`s manual

ManualsBrandsRadio Shack ManualsRemote Control7-in-One RF

Need help? Call

1-800-763-9232

Note:

You might need to use the

VOL

keys to

control volume, depending on which device you select-

ed during these steps.

Resetting Volume Lock

To restore volume control to each individual device:

1. Hold down

SETUP

until TIMED SEQ appears.

2. Press

twice. CONFIGURE appears.

3. Press

SELECT

. THEATR SEL appears.

4. Press

twice. VOL LOCK appears.

5. Press

SELECT

. LOCK appears.

6. Press

. UNLOCK appears.

7. Press

SELECT

. Each device now controls its own

volume when you use the volume keys on your 7-

in-One.

USING THE MACRO KEYS

The 7-in-One has two macro keys,

AUD

and

VID

. Each

key lets you play back a series of up to 15 keystrokes at

any time with the press of a single key, in any mode.

You can set up a maximum of 36 macros, 15 timed se-

quences (see “Setting Up Timed Sequences” on

Page 42), or a combination of both.

For example, follow these steps to set up a macro on

VID

that turns on your TV, VCR, and satellite system so

you can record a program.

Note:

If you make a mistake, press

ESC

and start over

at Step 1.

1. Hold down

SETUP

. TIMED SEQ appears.

15-1935.fm Page 41 Thursday, December 31, 1998 11:37 AM