Owner`s manual

Need help? Call 1-800-763-9232
39
2. Press
MENU
twice. CONFIGURE appears.
3. Press
SELECT
. THEATER SEL appears.
4. Press
MENU
twice. SLEEP LOCK appears
5. Press
SELECT
. DISABLE appears.
6. Press
MENU
. ENABLE appears.
7. Press
SELECT
to stop programming.
Whenever you press
SLEEP
(
SHIFT
then
MUTE
), SLEEP
15 appears. To add time to the sleep timer, press
MENU
. Each press of
MENU
adds 15 minutes to the sleep
timer, up to a total of 60 minutes. When the desired
sleep time appears, press
SELECT
. SLEEP appears.
When Sleep Lock is enabled, the 7-in-One activates its
own Sleep Timer. To use another device’s sleep timer,
or to simply disable Sleep Lock, repeat the above steps,
pressing
MENU
to select DISABLE in Step 6.
CONVERTING DEVICE KEYS
You can use the 7-in-One to operate a second TV or
VCR, or any combination of up to six devices. To do
this, you must first convert an unused device key (
AMP
,
TUN
,
TV
,
CD
,
CBL
,
VCR
, or
SAT
) to operate the second
device.
For example, to convert
CBL
to operate a second TV:
1. Hold down
SETUP
until TIMED SEQ appears.
2. Press
MENU
twice. CONFIGURE appears.
3. Press
SELECT
. THEATR SEL appears.
4. Press
MENU
three times. MODE MAP appears.
5. Press
SELECT
. SOURCE appears.
6. Press
TV
. COPY TO appears.
15-1935.fm Page 39 Thursday, December 31, 1998 11:37 AM