Owner`s manual

External Speaker Jack —lets you connect your transceiver to all

external speaker.

Built-In Modulation Limiter Circuit — automatically adjusts for a

wide variety of voice levels to ensure an understandable trans-

mission.

PL 259 · BNC Right Angle Connector — provides connection

with rubber duck antenna.

Digit Channel LED Display —displays the channel number 1 or 2.

CTCSS Switch — lets you activate/ deactivate CTCSS function.

The transceiver’s preset frequencies are:

• 151.625 MHz (red dot)

• 151.700 MHz

• 151.760 MHz

• 151.820 MHz

• 151.880 MHz

• 151.940 MHz

• 151.955 MHz (purple dot)

• 154.570 MHz (blue dot)

• 154.600 MHz (green dot)

Note:

• Some manufacturers identify some business band frequen-

cies by color. These “dot” frequencies are shown above.

• To use this transceiver, you must connect a mobile or base

station antenna. Your local RadioShack store has a wide vari-

ety of antennas. For more information, see ‘”Connecting an

Antenna” on Page 10.

We recommend you record your transceiver’s serial number

here.

19-1210.fm Page 3 Tuesday, August 3, 1999 11:32 AM