Owner`s manual

Operation

Note: You can only communicate with another transceiver that is

using the same channel and/or the same CTCSS code as your

transceiver.

1. Turn VOLUME clockwise to turn on the transceiver, turn

SQUELCH fully counterclockwise until you hear a hissing

noise, then adjust the volume to a comfortable listening level.

2. If you did not set the transceiver to use a CTCSS code, wait

until there is no signal on the channel. Then turn SQUELCH

clockwise until the background noise between signals stops.

3. To transmit, hold down PUSH TO TALK on the microphone.

Then hold the supplied hand microphone about 3 inches

illus - show VOLUME bein

adjusted

19-1210.fm Page 27 Tuesday, August 3, 1999 11:32 AM