Owner`s manual

For base station installation, you need these items:

• 12 VDC power supply that can supply at least 2 amps (such

as RadioShack Cat. No. 22-504)

Caution: Most 12 VDC power supplies plug into a standard

AC outlet to produce DC power. Before connecting your

transceiver to a 12 VDC power supply, read and follow the

instructions included with the power supply.

• base station antenna (such as Cat. No. RSU 11529526)

• coaxial antenna cable and connectors, available at your local

RadioShack store.

Caution: To prevent damage to the transceiver, be sure you

connect an antenna and the microphone before you use the

transceiver.

Follow these steps to install the transceiver as a base station.

1. Mount the base station antenna as described in its owner’s

manual.

Warning: Use extreme caution when you install or remove a

base station transceiver antenna. If the antenna starts to fall,

let it go! It could contact overhead power lines. If the antenna

touches a power line, contact with the antenna, mast, cable,

or guy wires can cause electrocution and death. Call the

19-1210.fm Page 19 Tuesday, August 3, 1999 11:32 AM