Owner`s manual

18
USING VEHICLE BATTERY POWER
Follow these steps to connect the transceiver to vehicle battery
power.
1. Connect the 12 VDC power plug into the Power Socket on the
back of the transceiver.
Notes: The plug can only be connected in one way.
2. Connect the red wire (with the in-line fuse holder) on the back
of the transceiver to a point in your vehicle’s fuse block that
has power only when the ignition is in the ACC (accessory) or
ON position.
3. Connect the black wire to a metal part of the vehicle’s frame
(chassis ground).
Caution: Do not connect the black wire to a non-metallic
(plastic) part, or to any part insulated from the vehicle’s chas-
sis by a non-metallic part.
USING THE TRANSCEIVER AS A BASE STATION
Although this transceiver is designed mainly for mobile use, you
can also use it as a base station with an DC power source.
19-1210.fm Page 18 Tuesday, August 3, 1999 11:32 AM