Owner`s manual

To connect the external speaker to the transceiver, insert the

speaker cable’s plug into EXT. SPK on the back of the transceiv-

er.

Note: When you connect an external speaker, the transceiver’s

internal speaker will be disconnected.

CONNECTING AN MICROPHONE/ EXTERNAL SPEAKER

To listen privately or to hear better, you can plug a with a

/8-

inch (3.5 mm) and 2.5mm plug (such as RadioShack Cat. No. 19-

312 and 19-316 which are not supplied) into the MIC and EAR

jack on the front panel of the transceiver. This will automatically

disconnects the build-in speaker.

Listening Safely

To protect your hearing, follow these guidelines when you use

an earphone.

• Set the volume to the lowest setting before you begin listen-

ing. After you begin listening, adjust the volume to a comfort-

able level.

• Do not listen at extremely high volume levels. Extended high-

volume listening can lead to permanent hearing loss.

19-1210.fm Page 16 Tuesday, August 3, 1999 11:32 AM