Manualshelf

Owner`s manual

ManualsBrandsRadio Shack ManualsRadio5W 8 Channel 2-Way Business Band Radio
11121314151617181920
15
CONNECTING THE EXTERNAL HAND MICROPHONE
1. Insert the microphone’s plug into the notch of the micro-
phone’s jack (on the left hand side of the transceiver). Then
turn the metal ring clockwise to secure the plug.
2. Slide the microphone onto the microphone holder.
To disconnect the microphone from the transceiver, turn the
metal ring counter-clockwise to loosen it.
Caution: Never pull on the microphone cable.
CONNECTING AN EXTERNAL SPEAKER
The external speaker you use with the transceiver should have
an impedance of 8 ohms and be able to handle 3 to 10 watts of
power (such as RadioShack Cat. No. 21-549). The speaker cable
must have a
1
/8-inch plug.
19-1210.fm Page 15 Tuesday, August 3, 1999 11:32 AM