Owner`s manual

Caution:

• If you use the transceiver in a vehicle, mount it securely to

aviod damage to the transceiver or vehicle or injury to any-

one in the vehicle during sudden starts or stops.

• Do not mount the transceiver where it could damage or inter-

fere with the operation of any passive restraint safety device

(an airbag or seat belt).

Follow these steps to mount the transceiver using the supplied

hardware.

1. Using the mounting bracket as a template, mark the positions

for the screw holes on the mounting surface.

2. In each marked location, drill a hole slightly smaller than the

supplied mounting screws.

Caution: Be careful not to drill into objects behind the mount-

ing surface.

3. Mount the bracket to the mounting surface with the supplied

5 mm bolts, spring washers, plain washers, and nuts.

19-1210.fm Page 12 Tuesday, August 3, 1999 11:32 AM