Owner`s manual

9
Quiet Codes
ˆ
Operation
Rotate
OFF/VOL
to turn the transceiver
on or off and adjust the volume.
Hold down
¿
/ to scan up through
the channels, or
À
/
SKIP
to scan down
through the channels.
Set
QUIET/Q-SCAN
to the desired code
to provide greater communication flexi-
bility.
If you did not set the transceiver to use
a quiet code, wait until there is no sig-
nal on the channel. Then turn
SQL
clockwise until the background noise
between signals stops.
To transmit, hold down
LOCK/PTT
.
Then hold the transceiver about 3 inch-
es from your mouth and speak slowly
in a normal voice.
7;
7;7;
7;
appears. Release
LOCK/PTT
when you finish your trans-
mission.
To receive, simply release
LOCK/PTT
.
%XV\
%XV\%XV\
%XV\
appears when a call is received.
Hold down
MON/FUNC
to hear every-
thing on a channel, even weak trans-
missions.
)81&
)81&)81&
)81&
appears. Release
MON/FUNC
to turn squelch back on.
The display’s backlight turns on for five
seconds when you press any key ex-
cept
LOCK/PTT
. To turn on the back-
light without changing the transceiver’s
setting, press
MON/FUNC
.
Code
Frequency
(Hz)
Code
Frequency
(Hz)
Code
Frequency
(Hz)
Code
Frequency
(Hz)
1 67.0 11 97.4 21 136.5 31 192.8
2 71.9 12 100.0 22 141.3 32 203.5
3 74.4 13 103.5 23 146.2 33 210.7
4 77.0 14 107.2 24 151.4 34 218.1
5 79.7 15 110.9 25 156.7 35 225.7
6 82.5 16 114.8 26 162.2 36 233.6
7 85.4 17 118.8 27 167.9 37 241.8
8 88.5 18 123.0 28 173.8 38 250.3
9 91.5 19 127.3 29 179.9
10 94.8 20 131.8 30 186.2