Owner`s manual

19
Operation
USING ANNUNCIATE MODE
Annunciate mode lets you set the alarm
system so it sounds a brief pre-alarm if it
detects any change in the assigned zone.
1. If the system is disarmed and no
zone is violated, hold down
SETUP
for about 2 seconds. ARMED and
READY flash slowly.
2. Enter the current security code
within 30 seconds. ARMED and
READY flash rapidly.
3. Press
ANNC
(annunciate) once.
ARMED and READY turn off.
4. To enable annunciate mode, press
ENTER
. READY flashes 3 times. If
the alarm system detects any
change in the assigned zone, it
sounds a brief pre-alarm.