Owner`s manual

16
Operation
 Operation
SETTING THE SECURITY
CODE
The 49-454 or 49-459 security system
lets you store one security code.
1. If the alarm system is armed, disarm
it by entering the current four-digit
personal security code. (If this is the
first time you have turned on the sys-
tem, the security code is the sys-
tem’s default code.) ARMED on the
keypad turns off.
2. Hold down
SETUP
for 2 seconds.
Both ARMED and READY flash
slowly.
3. Enter the current security code. Both
ARMED and READY flash rapidly.