User`s guide

3.2 Connect Handset

Plug either end of the coiled handset cord into the handset and the other end into

the jack on the side of the telephone. Place the handset in the cradle.

3.3 Connect Power Cord

Plug the AC power cord into the adapter jack on the bottom of the telephone.

Thread the power cord into the recessed groove. Plug the AC adapter into an elec-

trical outlet not controlled by a wall switch.

3.4 Install W

all Mount Bracket/Desk Pedestal (Optional: Please contact your

local agent for ordering)

First, you must connect the long telephone line cord to the jack by the baseboard,

and plug the AC adapter into the nearest electrical outlet.

3.4.1 Install Wall Mount Bracket

 Reverse Handset Hook

 Attach Telephone to Wall

3.4.2 Install Desk Pedestal

Installing Your System

Slide the telephone hook out of the

cradle, rotate it 180 degrees so that

its tab faces upward, and then slide

it back into the cradle.

Hold the telephone close to the wall

and connect the short telephone

line cord to the jack.Then mount the

telephone to the wall plate, sliding it

down firmly so that it locks securely

in place.

The wall mount bracket can also be

used as a desk pedestal. Simply

attach the bracket in the opposite

direction that you would for wall

mounting, pressing firmly upward to

snap it in place.

You may choose to place your

EP4300 telephone on a desk with-

out the desk pedestal. If you do so,

set the desk pedestal/wall mount

bracket aside in case you want to

use it in the future.